2008-17 Arctic Cat Prowler 700 Drive Belt | Ultimax XP
View full product details- Fits:
- Arctic Cat Prowler
- Years:
- 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Confirm your exact model and year before ordering.
Ultimax UXP406 is a XP-series CVT drive belt for select Arctic Cat Prowler & HDX 700 applications. Choose it by the exact vehicle and model-year rows below, whether replacing a worn belt or preparing a spare for your next ride.
Correct belt selection matters as much as the vehicle name. Arctic Cat Prowler & HDX 700 applications can use different belts across years and trims, so compare your original belt number and clutch configuration before ordering UXP406.
Arctic Cat Prowler & HDX 700 CVT Drive Belt Features
- XP-series construction intended for demanding UTV and side-by-side CVT applications.
- Aramid reinforcement supports belt stability under load.
- Fiber-loaded compounds support clutch grip and power transfer.
- Application-specific dimensions: match the part number and exact vehicle application.
Ultimax UXP406 Vehicle Fitment
Only the applications and years shown in the same row are covered. Do not apply the overall year range to every listed model. Confirm the original belt number if your machine has a different clutch, engine or special-edition package.
| Make | Model / trim | Model years |
|---|---|---|
| Arctic Cat | Hdx 700 Crew XT | 2017 |
| Arctic Cat | Hdx 700 XT | 2016β2017 |
| Arctic Cat | Prowler 550 | 2010β2015 |
| Arctic Cat | Prowler 650 | 2007β2008 |
| Arctic Cat | Prowler 700 | 2008β2017 |
| Arctic Cat | Prowler XT 550 | 2011β2012 |
| Arctic Cat | Prowler XT 650 | 2006β2010 |
| Arctic Cat | Prowler Xtx 700 | 2009β2012 |
What's Included
One Ultimax UXP406 drive belt. Clutches, removal tools and other drivetrain components are sold separately.
Installation and Belt Break-In
Follow your vehicle service manual. Inspect clutch condition, alignment, ventilation and seals, remove old belt debris, and follow the vehicle and belt manufacturer's installation and break-in instructions. Use the specified clutch-spreader tool and service-manual torque values for your machine. Address the cause of abnormal belt wear before fitting a replacement.
Warranty, Returns and Shipping
Contact RAD UTV Parts before purchase for the current manufacturer warranty terms applicable to the belt supplied. Warranty eligibility, exclusions and claim procedures depend on the manufacturer. Review our store policies for return eligibility and shipping details; delivery timing depends on stock and destination.
Frequently Asked Questions
Which vehicles fit the Ultimax UXP406 drive belt?
UXP406 fits the specific Arctic Cat Prowler & HDX 700 applications in the fitment table. Years and trims vary by model; verify your exact vehicle and original belt number before ordering. A listed year does not apply to every model.
Is UXP406 a universal drive belt?
No. UXP406 is an application-specific CVT drive belt. Similar-looking belts can differ in dimensions and construction; use the exact application rows rather than engine size alone.
What is included?
One Ultimax UXP406 drive belt. Clutches, removal tools and other drivetrain components are sold separately.
What should I check when replacing a CVT belt?
Follow your vehicle service manual. Inspect clutch condition, alignment, ventilation and seals, remove old belt debris, and follow the vehicle and belt manufacturer's installation and break-in instructions.
Compare Ultimax UTV drive belts and shop all UTV and side-by-side drive belts or browse Arctic Cat Parts & Accessories, Arctic Cat Prowler Parts & Accessories.
Image shows the Ultimax XP product family and is representative. Belt dimensions, packaging and markings vary by part number.
COMPLETE YOUR SETUP
Pairs well with
Choose the extras that make sense for your setup.
