Elektric Offroad Tie Rods & Suspension Braces
Tie rods, shock mount braces and suspension hardware
Find Elektric Offroad steering and suspension components for selected Can-Am Maverick X3 and Maverick R models. This collection includes billet tie rods, upper shock mount braces, a rear link nut plate kit and a trailing arm pivot gusset. Each serves a different part of the vehicle, so choose by the component you are replacing or reinforcing.
The listed EOD tie rods use factory rod ends. Maverick X3 versions specify RS 72-inch models, while Maverick R versions have their own application. Choose the correct chassis before comparing black and clear finishes.
Plan the installation around the actual component
The Maverick X3 upper shock mount brace replaces the factory front upper mount and includes an adjustable, removable light bracket. It is a different upgrade from a steering tie rod and should be selected for its stated mounting location.
The Maverick R trailing arm pivot gusset, RVSPA0005, is a weld-in component. Plan for the fabrication work described in its installation information. The rear link nut plate kit has a different procedure and calls for drilling out factory rivets. Installation requirements should be checked individually across this collection.
- Identify the chassis: record model, year, trim and width before ordering tie rods.
- Review retained components: check whether the selected part reuses factory rod ends or other existing hardware.
- Confirm the mounting area: upper shock mount, steering and trailing arm pivot components perform different jobs.
- Prepare for the work: read the product instructions before scheduling installation or disassembling the vehicle.
Steering and suspension component questions
Do the Maverick X3 tie rods fit narrower X3 models?
The X3 tie rods in this collection specify RS 72-inch models. Do not extend that fitment to a narrower chassis without explicit manufacturer confirmation.
Do these tie rods include replacement rod ends?
The listed billet tie rods are described as using factory rod ends. Review the selected listing for the supplied components and assess the existing ends before installation.
Is every part in this collection bolt-on?
No. RVSPA0005 requires welding, and the rear link nut plate kit calls for factory-rivet removal. Follow the procedure for the specific component.
Does the shock mount brace include a light?
The listing describes a light mounting bracket. A mounting provision does not mean a light is included; confirm the product contents before adding lighting.
Continue with Elektric Offroad Radius Rods & Plates and Elektric Offroad Sway Bar Links, or browse all Elektric Offroad Designs accessories.
