AJK Offroad Upgrades: Packout Mounts, Storage & What to Buy First
A toolbox that slides around the bed gets old quickly. So does unloading half your gear to reach a recovery strap. The right storage upgrade makes the machine easier to use every time you stop, load up or head home.
AJK Offroad is worth a look when you want to organize a UTV around the gear you actually carry. Its vehicle-specific Packout mounts, bed drawers and cargo racks offer several ways to do that. Protection parts and spare-tire mounts solve different problems, so the best first purchase depends on where your current setup falls short.

This guide compares practical first buys from the AJK Offroad collection at RAD UTV Parts, with the fitment checks that can save an unnecessary return.
Which AJK Offroad upgrade should you buy first?
Start with the problem you encounter most often. If loose tools are the frustration, a suitable Packout mount can be a useful first step—especially if you already own compatible boxes. If the lower body regularly meets rocks, move protection ahead of storage. For longer trips, plan where the spare tire and essential gear will go before filling the bed with accessories.
| Your priority | First product category to consider | Why it earns its place |
|---|---|---|
| Keep tools and supplies organized | Vehicle-specific Packout mounts | A defined mounting position for compatible removable boxes |
| Reach gear without climbing into the bed | Defender HD11 bed drawer | Brings the storage surface out toward the tailgate |
| Protect exposed lower bodywork | Kawasaki Ridge sliders with step | Combines lower-body protection with an entry step on the listed application |
| Carry bulky gear above the bed | Cargo and headache racks | Adds another place to organize equipment while preserving some bed space |
| Find a dedicated spare-tire location | CFMOTO ZFORCE Z10 spare-tire rack | Positions the spare above the bed; check tire size and remaining access |
This is a buying order by need, not a claim that every UTV needs every accessory. A well-planned mount and a few useful boxes can be a better fit for a day ride than a large rack you rarely fill.
Packout mounts: a practical place to start
A Packout mount gives compatible Milwaukee storage a dedicated attachment point on the vehicle. The appeal is flexibility: organize repair tools, recovery equipment and everyday supplies separately, then remove the containers when you unload.
Choose the box layout before the mounting plate. Check the footprint of the boxes you own, where their lids swing, and whether the release latch remains accessible. The tallest stack in a product photo may not suit your rear visibility, rack clearance or everyday load.

| Vehicle and mount | Useful detail | Check before checkout |
|---|---|---|
| Kawasaki KRX Packout Mount 1.5 | AJK lists room for three small boxes or one large box centered on the mount | Not compatible with the factory subwoofer |
| Polaris RZR Pro R Packout Mount | Main mount uses existing factory holes; a small rear mount is optional | Select the rear-mount option if needed and confirm your bed layout |
| Can-Am Defender HD11 Front Packout Mount | Mounts toward the front of the bed, near the rear window; listed for two large boxes | Confirm box access and clearance around any rack or bed accessories |
| CFMOTO ZFORCE Z10 Packout Mount 1.0 | A dedicated Z10 storage option to compare with other Z10 layouts | Do not assume fitment transfers to another ZFORCE model |
Packout mounts and Packout boxes are separate items unless the selected listing explicitly says otherwise. Photos often show boxes or coolers to demonstrate the layout. Optional locks, extra mounting positions and other accessories also need to be checked individually.
On the KRX, the subwoofer detail deserves attention before anything goes in the cart. AJK explicitly distinguishes the 1.5 mount from its subwoofer-compatible design. Matching “KRX” in the title alone is not enough.
Bed drawers: pay for easier access when you use it often

The Can-Am Defender HD11 Bed Drawer is an upgrade for the rider who is constantly reaching into the bed. AJK lists 34 inches of extension and slides that lock in both the open and closed positions. That makes access the main reason to consider it.
Before ordering, measure the space behind the machine where you normally park and unload. Think about tailgate access, nearby trailers and the height of anything you plan to secure to the drawer. An easier-to-reach load is only useful if the drawer can fully open where you need it.
AJK identifies a 500-pound rating for the slide set in its HD11 drawer specifications. Do not treat that component figure as an increased vehicle payload allowance. Account for the accessory’s own weight and follow the vehicle and accessory loading limits. Also confirm which optional Packout mounts are included in your selected configuration.
Cargo racks: plan the whole bed before adding height
The Polaris XPEDITION half headache rack provides a compact raised tray and side mounting panels. It is a different approach from covering most of the bed with a full rack: useful when you want extra mounting space while keeping the layout relatively open.
Lay out your cooler, boxes and other cargo first. Then check whether you can still open lids, remove containers and reach tie-down points once a rack is installed. Confirm the exact XPEDITION body and bed configuration; a shared model name does not make every rack interchangeable.
If your real problem is carrying a spare, compare a dedicated carrier rather than buying a general rack and improvising. The ZFORCE Z10 spare-tire rack is listed to accommodate a 32-inch tire above the bed. Its tire strap is an option, and the tailgate shown with some configurations is not included. Verify tire dimensions, retention equipment and clearance as a complete setup.
Protection and mounting upgrades beyond storage
Storage is only part of AJK’s range. The Kawasaki Ridge rock sliders with step are designed around lower-body protection and easier entry. The listing specifies supplied hardware and a no-drill installation for the stated application. Confirm the exact vehicle configuration rather than extending that fitment to the entire Kawasaki lineup.
AJK bumpers and Rotopax mounts are other categories to compare once your main needs are covered. With cage-mounted accessories, verify tubing diameter at the intended attachment point and clearance from doors, windows and other equipment. An aftermarket cage can change those measurements.
Common buying mistakes to avoid
- Assuming every AJK mount is no-drill. Installation varies by product and option. Read the instructions for the exact part.
- Ordering from the vehicle name alone. Model year, trim, bed layout, factory audio and existing accessories can affect fit.
- Confusing mounting space with payload capacity. A rack gives equipment a place to sit; it does not raise the machine’s load limits.
- Buying accessories one at a time without checking interference. A drawer, rack and storage boxes may each fit the vehicle independently without working together.
- Counting everything in the photo as included. Check for boxes, fuel containers, straps, locks and optional mounting plates in the actual parts list.
AJK Offroad questions
Are AJK Offroad parts universal?
Many are designed around specific vehicles and mounting locations. Use the individual product’s fitment details, and confirm your exact configuration when the listed year range is incomplete.
Are AJK Packout mounts worth it if I already own Milwaukee boxes?
They are a sensible option to compare if your boxes match the mount’s layout and you want to move them between the UTV and other uses. Check box compatibility and access before deciding.
Should I buy a bed drawer or a fixed Packout mount?
Choose a fixed mount when securing removable boxes solves the problem. Consider a drawer when reaching equipment deep in the bed is the recurring frustration and you have room to extend it.
Are the featured products made in the USA?
AJK lists the featured KRX 1.5 mount, Pro R mount, HD11 drawer, XPEDITION half rack and Ridge step sliders as made in the USA. Check each product listing for its own construction and origin details.
Build around the gear you take on every ride
Make a short list of the items that always go with you, then give each one a secure, accessible place. Start with the mount, drawer or protection part that fixes your biggest inconvenience. Add the next accessory only after checking how it fits into that layout.
Shop AJK Offroad UTV parts and accessories at RAD UTV Parts, or start with AJK Packout mounts and cargo racks. For broader vehicle upgrade priorities, see our XPEDITION accessory guide and Defender HD11 upgrade guide.

