Dynojet Power Vision 3 ECU Tuner for Kawasaki KRX 1000

Unlock more performance from your Kawasaki Teryx KRX 1000 with the Rev1 Dynojet Power Vision 3 ECU Tuner. This plug-in tuner adjusts key ECU settings to increase performance, raise factory speed and rev limits, lower fan temperatures, and add useful features such as simultaneous throttle and brake operation.

The Power Vision 3 is more than a flash tuner. Leave it connected while you ride to monitor live engine data, record diagnostic information, and log your KRX's performance. After your ride, the included Power Core software lets you review data and make adjustments to compatible tunes from your PC.

What does the Dynojet Power Vision 3 do for a Kawasaki KRX 1000?

The Power Vision 3 reprograms compatible ECU settings to improve performance, raise the speed and rev limiters, lower fan activation temperatures, improve limp-mode behavior, and allow simultaneous throttle and brake operation. It also works as a live diagnostic display and data logger.

More Performance Without Major Modifications

The Dynojet Power Vision 3 gives your KRX 1000 access to performance changes through the factory diagnostic connection. The tune adjusts engine parameters and removes some of the restrictions found in the stock ECU calibration.

Performance features include:

• Higher rev limits
• Higher speed limits
• Lower fan temperatures
• Faster limp mode
• Simultaneous throttle and brake operation
• Adjustable tunes

Installs Through the Factory Diagnostic Port

No complicated installation is required. The Power Vision 3 connects through the KRX 1000's standard diagnostic plug and can be installed in just a few minutes.

Its full-color display provides an easy-to-read interface for flashing tunes, viewing vehicle information, and monitoring data while you ride.

Live Diagnostics and Data Logging

Leave the Power Vision 3 connected after flashing your tune and use it as a live diagnostic display. It can monitor vehicle information such as:

• Engine RPM
• Coolant temperature
• Wheel speed
• Additional compatible ECU data

The tuner can also record ride data for later review, giving you useful information when troubleshooting or evaluating changes to your setup.

Tweak Tunes with Power Core Software

Connect the Power Vision 3 to a PC after your ride and use the included Dynojet Power Core software to analyze logged data and make compatible adjustments to your tunes.

The ECU can also be returned to stock specifications when needed.

Key Features

• Installs through the standard diagnostic plug
• Full-color display
• Raises rev limiter
• Raises speed limiter
• Lowers fan temperatures
• Faster limp mode
• Allows simultaneous throttle and brake operation
• Can be returned to stock specifications
• Live diagnostic display
• On-machine data logging
• Compatible with Dynojet Power Core tuning software
• Allows compatible tunes to be adjusted

Fitment

• Kawasaki Teryx KRX 1000: 2020-2024
• Kawasaki Teryx KRX 1000 Special Edition: 2021-2024
• Kawasaki Teryx KRX 1000 Trail Edition: 2021-2024
• Kawasaki Teryx KRX 1000 eS: 2021-2024
• Kawasaki Teryx KRX 4 1000 SE: 2023-2024
• Kawasaki Teryx KRX 4 1000 eS: 2023-2024
• Kawasaki Teryx KRX 4 1000 eS Special Edition: 2023-2024

Important ECU Tuner Return Policy

All ECU tuners are non-returnable. Each tuner pairs to the unique ECU of the machine it is installed on and cannot be reset for use on another machine. Please verify fitment before installation.

Important Warning

This product can affect machine operation. The customer or installer is responsible for confirming compatibility with the machine's current configuration, completing the installation correctly, and understanding how the tune may affect vehicle operation.

California Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.