Honda Talon Lug Pattern & Bolt Pattern: 4x137 Wheel Guide

Last updated: October 2026.

If you’re searching for the Honda Talon lug pattern or Honda Talon bolt pattern, the quick answer is 4x137. That fitment applies across the Talon 1000X, 1000X-4, 1000R and 1000R-4 family, including FOX Live Valve trims. The wheel studs use an M12x1.5 thread.

Honda Talon Lug Pattern: Quick Specs

The most important buying rule is simple: don’t shop by bolt pattern alone. A wheel can have a 4x137 pattern and still be wrong for your Talon because of offset/backspacing, center-bore clearance, lug-seat design, wheel diameter, brake clearance, or tie-rod clearance.

Is the Honda Talon 4x136 or 4x137?

Use 4x137 as the primary Honda Talon wheel pattern. Some aftermarket catalogs label compatible wheels as 4x136/4x137, which is why you may see both numbers when shopping. The safest approach is to choose a wheel that explicitly lists Honda Talon fitment or 4x137 fitment from the manufacturer.

Do not drill or enlarge wheel lug holes to force a wheel to fit. If a wheel does not seat correctly on the hub and studs as designed, choose the correct wheel instead.

Honda Talon Stock Wheel and Tire Sizes

Honda Talon factory tire size now depends on the model and model year, so the older “all Talons use 28-inch tires” answer is no longer accurate.

Honda increased the 2026 Talon 1000R and 1000R-4 to 30-inch tires, while the 2026 1000X and 1000X-4 remain on 28-inch tires. If you own an earlier Talon, confirm your exact model year before ordering replacement tires or a wheel-and-tire package.

For current factory specifications, see Honda’s official 2026 Talon 1000R specifications and 2026 Talon 1000X specifications.

Honda Talon Wheel Offset and Backspacing

Offset and backspacing determine where the wheel sits in relation to the hub. Moving the wheel outward can increase track width and clearance, while moving it inward can create interference with suspension or steering components.

When choosing aftermarket Honda Talon wheels, verify all of the following:

• 4x137 bolt pattern
• M12x1.5-compatible lug hardware
• Correct wheel diameter and width
• Manufacturer-approved offset or backspacing for your Talon
• Center-bore and hub clearance
• Brake, tie-rod and suspension clearance
• Correct lug-seat style for the wheel

Our UTV Wheels collection includes a Vehicle Model filter so you can narrow the catalog to products tagged for Honda Talon fitment instead of guessing from bolt pattern alone.

What Other UTV Wheels Fit a Honda Talon?

Several UTVs use a 4x137 bolt circle, but a matching bolt pattern does not automatically make the wheel interchangeable. Can-Am and Kawasaki applications, for example, may use the same 4x137 pattern while still having different offset, center-bore, lug-seat, or clearance requirements.

If you are trying to reuse wheels from another machine, verify the wheel manufacturer’s fitment data before installing them. For a new purchase, the cleaner option is to shop wheels specifically listed for the Honda Talon.

Honda Talon Lug Nut Size and Torque

The Honda Talon uses M12x1.5 wheel studs. Honda owner-manual guidance specifies 80 lb-ft (108 N·m) for the factory wheel nuts. Tighten wheel nuts in a crisscross pattern so the wheel seats evenly.

Aftermarket wheels or lug nuts can use a different seat design or require different installation instructions, so always follow the wheel manufacturer’s directions when they differ from the OEM setup.

Shopping for Honda Talon Wheels, Tires and Accessories

If this guide helped confirm your fitment, you can shop the rest of the Talon by vehicle instead of searching the entire store:

• Honda Talon Parts & Accessories — model-specific upgrades across the store
• UTV Wheels — use the Vehicle Model filter for Honda Talon
• UTV Tires — replacement and upgrade tire options
• Wheel & Tire Kits — matched package options
• Honda Talon 4x137 Wheel Spacers — for applications where additional clearance or track width is intentionally needed

Honda Talon Bolt Pattern FAQ

What is the Honda Talon lug pattern?

The Honda Talon uses a 4x137 lug pattern, also called a 4/137 bolt pattern.

What size are Honda Talon wheel studs?

The Honda Talon uses M12x1.5 wheel studs.

What is the Honda Talon lug nut torque?

For the factory wheel nuts, Honda specifies 80 lb-ft (108 N·m). Use a crisscross tightening pattern and follow any different instructions supplied with aftermarket wheels or lug nuts.

Are 4x136 and 4x137 wheels interchangeable on a Honda Talon?

Some aftermarket catalogs use 4x136/4x137 labeling for Talon-compatible wheels. Rather than relying on the number alone, choose a wheel explicitly listed for Honda Talon or 4x137 fitment. Do not modify lug holes to make a wheel fit.

What size wheels come stock on a Honda Talon?

Current Honda Talon models use 15-inch wheels. Factory tire size varies by model and year.

What tire size comes on a 2026 Honda Talon?

The 2026 Talon 1000X and 1000X-4 use 28x9-15 front and 28x11-15 rear tires. The 2026 Talon 1000R and 1000R-4 use 30x9-15 front and 30x10-15 rear tires.

Will Can-Am 4x137 wheels fit a Honda Talon?

The bolt circle may match, but that is not enough to guarantee fitment. Offset/backspacing, center bore, lug-seat type and suspension/brake clearance also need to match. Use wheels specifically listed for Honda Talon fitment whenever possible.

Bottom Line

The Honda Talon’s primary wheel pattern is 4x137 with M12x1.5 studs. Match the bolt pattern first, then confirm offset/backspacing, center bore, lug-seat style and model-year tire requirements before ordering.

When you’re ready to upgrade, start with our Honda Talon Parts & Accessories collection and use the fitment filters to shop parts built for your machine.