Honda Talon Lug Pattern & Bolt Pattern: 4x137 Wheel Guide
Last updated: October 2026.
If you’re searching for the Honda Talon lug pattern or Honda Talon bolt pattern, the most common aftermarket wheel-fitment listing is 4x137, although you may also see 4x136 or 4x136/4x137 in Honda Talon fitment guides. These labels are used for Talon 1000X, 1000X-4, 1000R and 1000R-4 applications, including FOX Live Valve trims, but always confirm the wheel maker lists your exact model and year. Talon wheel studs use an M12x1.5 thread.
Shopping for your Honda Talon?
Start with our Honda Talon Parts & Accessories, then browse UTV Wheels, UTV Tires, or Wheel & Tire Kits. Use the Vehicle Model filter to narrow the wheel options. If you are replacing hardware, compare wheel studs and lug nuts and confirm the thread, stud dimensions and lug-seat style against your hub and wheel.
Honda Talon Lug Pattern: Quick Specs
| Specification | Honda Talon |
|---|---|
| Bolt / lug pattern | 4x137 aftermarket fitment (also listed as 4x136/4x137 for compatible Talon wheels) |
| Wheel stud thread | M12x1.5 |
| Factory wheel diameter | 15 inches on current Talon models |
| Factory wheel-nut torque | 80 lb-ft (108 N·m) for OEM wheel nuts; verify your owner’s manual and aftermarket wheel instructions |
The most important buying rule is simple: don’t shop by bolt pattern alone. A wheel can have a 4x137 pattern and still be wrong for your Talon because of offset/backspacing, center-bore clearance, lug-seat design, wheel diameter, brake clearance, or tie-rod clearance.
Is the Honda Talon 4x136 or 4x137?
Both numbers appear in Talon wheel-fitment references. Some wheel specialists describe the original Talon bolt circle as 4x136 mm; wheel makers commonly list aftermarket Talon-compatible wheels as 4x137 mm or 4x136/4x137. This is an industry fitment-labeling convention, not permission to force any 4x137 wheel onto a Talon. Examples include the Packard Performance Talon fitment guide and Valor Offroad's Honda fitment chart.
Before buying, confirm the wheel manufacturer explicitly approves the wheel for your Honda Talon model and year, including bolt-circle compatibility, lug-seat shape, hub clearance, offset, and brake/suspension clearance.
Do not drill or enlarge wheel lug holes to force a wheel to fit. If a wheel does not seat correctly on the hub and studs as designed, choose the correct wheel instead.
Honda Talon Stock Wheel and Tire Sizes
Honda Talon factory tire size now depends on the model and model year, so the older “all Talons use 28-inch tires” answer is no longer accurate.
| Model | Front Tire | Rear Tire | Wheel Diameter |
|---|---|---|---|
| 2026 Talon 1000X / 1000X-4 | 28x9-15 | 28x11-15 | 15 in. |
| 2026 Talon 1000R / 1000R-4 | 30x9-15 | 30x10-15 | 15 in. |
| 2025 Talon 1000R | 28x9-15 | 28x11-15 | 15 in. |
Honda increased the 2026 Talon 1000R and 1000R-4 to 30-inch tires, while the 2026 1000X and 1000X-4 remain on 28-inch tires. If you own an earlier Talon, confirm your exact model year before ordering replacement tires or a wheel-and-tire package.
For current factory specifications, see Honda’s official 2026 Talon 1000R specifications and 2026 Talon 1000X specifications.
Honda Talon Wheel Offset and Backspacing
Offset and backspacing determine where the wheel sits in relation to the hub. Moving the wheel outward can increase track width and clearance, while moving it inward can create interference with suspension or steering components.
When choosing aftermarket Honda Talon wheels, verify all of the following:
- Wheel-maker-confirmed Honda Talon fitment (commonly marketed as 4x137 or 4x136/4x137)
- M12x1.5-compatible lug hardware
- Correct wheel diameter and width
- Manufacturer-approved offset or backspacing for your Talon
- Center-bore and hub clearance
- Brake, tie-rod and suspension clearance
- Correct lug-seat style for the wheel
Our UTV Wheels collection includes a Vehicle Model filter so you can narrow the catalog to products tagged for Honda Talon fitment instead of guessing from bolt pattern alone.
What Other UTV Wheels Fit a Honda Talon?
Several UTVs use a 4x137 bolt circle, but a matching bolt pattern does not automatically make the wheel interchangeable. Can-Am and Kawasaki applications, for example, may use the same 4x137 pattern while still having different offset, center-bore, lug-seat, or clearance requirements.
If you are trying to reuse wheels from another machine, verify the wheel manufacturer’s fitment data before installing them. For a new purchase, the cleaner option is to shop wheels specifically listed for the Honda Talon.
Honda Talon Lug Nut Size and Torque
The Honda Talon uses M12x1.5 wheel studs. Honda owner-manual guidance specifies 80 lb-ft (108 N·m) for the factory wheel nuts. Tighten wheel nuts in a crisscross pattern so the wheel seats evenly.
Aftermarket wheels or lug nuts can use a different seat design or require different installation instructions, so always follow the wheel manufacturer’s directions when they differ from the OEM setup.
Shopping for Honda Talon Wheels, Tires and Accessories
If this guide helped confirm your fitment, you can shop the rest of the Talon by vehicle instead of searching the entire store:
- Honda Talon Parts & Accessories — model-specific upgrades across the store
- UTV Wheels — use the Vehicle Model filter for Honda Talon
- UTV Tires — replacement and upgrade tire options
- Wheel & Tire Kits — matched package options
- Honda Talon 4x137 Wheel Spacers — for applications where additional clearance or track width is intentionally needed
Already know your machine?
Shop Honda Talon accessories → and use the store filters to narrow by product type, brand and fitment.
Honda Talon Bolt Pattern FAQ
What is the Honda Talon lug pattern?
Aftermarket wheels for the Honda Talon are commonly labeled 4x137 (also written 4/137), while some fitment specialists describe the original bolt circle as 4x136. Use wheels that the manufacturer explicitly approves for your Talon model and year.
What size are Honda Talon wheel studs?
The Honda Talon uses M12x1.5 wheel studs.
What is the Honda Talon lug nut torque?
For the factory wheel nuts, Honda specifies 80 lb-ft (108 N·m). Use a crisscross tightening pattern and follow any different instructions supplied with aftermarket wheels or lug nuts.
Are 4x136 and 4x137 wheels interchangeable on a Honda Talon?
Some wheel manufacturers approve Talon-specific wheels marked 4x136/4x137, but not every wheel with either marking automatically fits. Verify the manufacturer's exact Talon application, hub bore, offset, wheel load rating, stud and lug-nut specifications, and brake clearance. Never drill, slot, or enlarge lug holes to force an incompatible wheel to fit.
What size wheels come stock on a Honda Talon?
Current Honda Talon models use 15-inch wheels. Factory tire size varies by model and year.
What tire size comes on a 2026 Honda Talon?
The 2026 Talon 1000X and 1000X-4 use 28x9-15 front and 28x11-15 rear tires. The 2026 Talon 1000R and 1000R-4 use 30x9-15 front and 30x10-15 rear tires.
Will Can-Am 4x137 wheels fit a Honda Talon?
The bolt circle may match, but that is not enough to guarantee fitment. Offset/backspacing, center bore, lug-seat type and suspension/brake clearance also need to match. Use wheels specifically listed for Honda Talon fitment whenever possible.
Bottom Line
Honda Talon-compatible aftermarket wheels are typically listed as 4x137 or 4x136/4x137, with M12x1.5 wheel studs. Choose a wheel specifically approved for your Talon's year and trim, then confirm offset/backspacing, center bore, lug-seat style, brake clearance, and tire requirements before ordering. Never modify a wheel's lug holes to make it fit.
When you’re ready to upgrade, start with our Honda Talon Parts & Accessories collection and use the fitment filters to shop parts built for your machine.
Check Width After Choosing Your Wheels
A compatible bolt pattern is only the first check. Wheel offset and tire section width can change your machine's outside dimensions. Use the side-by-side width and measuring guide before committing to a setup for a narrow trailer or trail.
