UTV Air Filter Buying Guide
If you care about performance and engine life, then you should pay close attention to your UTV’s air filter. It alone can drastically improve or shorten your vehicle’s lifespan. Having said that, it’s important to take note of when you need to change it. Or clean it in case of an emergency. But only in case of emergencies.
Anyway, in today’s article, we will be talking about the best air filters that you can get right now for your UTV. We will be showcasing each one in no particular order with a short description that will tell you exactly what benefits you’re getting and other characteristics that make up the entire kit (where applicable).
Cold Air Intake Kit Can-Am Maverick X3 Turbo | Agency Power
If you’re ever planning on upgrading your Can-Am Maverick X3 Turbo with a turbo kit and other similar items, then you won’t want to miss out on buying the Cold Air Intake Kit made by Agency Power. This differently-designed kit features a high-flow air filter that provides your turbocharger with more CFM when it needs it most.
This kit is engineered to be a proper replacement for the factory Can-Am Maverick X3 Turbo intake. Each part of the intake has been meticulously thought out to provide performance, longevity, and reliability. And, if you ask us, the best part is that the air filter is reusable, so you can clean it and make the best out of it for longer.
Agency Power Cold Air Intake Kit Polaris RZR XP 1000
Another offering from Agency Power, this cold air intake kit comes with durable silicone couplers, a powder-coated aluminum tube, and an upgraded high flow reusable air filter. The custom high flow Agency Power filter features a blue mesh design with an AP logo end cap. It’s aesthetically pleasing, to say the least.
But aesthetics aren’t the only things that this bad boy’s got. Not by a long shot. Apart from looks and performance, this unit is also easy to install right between the engine and the stock airbox. It also eliminates turbulence due to the smooth interior and it allows the velocity stack on top of the filter to take full advantage of the RZR air side vent.
Polaris RZR 1000 Extreme Series Air Filter | R2C Performance
Do you like using your Polaris RZR 1000 UTV off-road a lot? We get it, it’s what it’s best at, after all. Well, you’re in luck because this particular filter is three times more efficient than the factory-built one. You’re gonna love the fact that the synthetic fiber structure stops and holds dust down to as little as 0.3 microns.
What’s more, the filter is also easily washable so you can keep on reusing it for extended durations. This specially designed filter media allows you to remove dust using compressed air from inside-out or vacuum the exterior when needed. Overall, it’s a fine piece of equipment to have if you like using your UTV off-road.
Polaris RZR K&N AIR FILTER & Pre Filter Wrap PL-1014 + PL-1014DK
This UTV air filter and pre-filter system combo is designed to provide more horsepower than what you would normally get with factory settings and components. It works on side-by-sides, ATVs, UTVs, and other off-road vehicles like motocross bikes. It’s made out of multiple layers of woven cotton gauze media that offers excellent filtration.
The system is washable and reusable, plus it fits directly into the OEM airbox with application specific sealing bead that ensures a tight seal. On top of all that, it doesn’t require you to make any fuel management modifications if you want increased performance. Basically, it’s a great kit for those who want both performance and ease of use.
Maverick X3 Boost Tube Kit with Blow off Valve by Trinity Racing
This kit is made specifically to increase the life of your turbo system. If you’re passionate about high speeds and high performance, then you should definitely consider getting the Maverick X3 Boost Tube Kit with Blow off Valve by Trinity Racing. That’s the gist of it in short. It keeps you going at high speeds for longer without the need to change pieces of equipment nearly as often.
One more thing worth taking into consideration is the fact that Trinity Racing boost tubes feature an oil-resistant liner and a bypass valve not available on stock models that release extra pressure to reduce turbo surges. In short, it gets a lot of complicated factors out of the equation so you’ll have a much easier time installing and using this wonderfully crafted kit.
How to Clean a UTV Air Filter
Needless to say, you’ll want to reuse filters that can be cleaned so you can get the most out of them. Here are the basic steps to take:
Gather these supplies:
- UTV owner’s manual
- Clean cloth
- Air filter cleaner and oil
- Other things specified in the manual
Remove the UTV air filter
Check the manual to see how to do this in your particular make and model’s case.
Add cleaner to the filter
Saturate it thoroughly and let it sit for about 10 minutes. Put enough cleaner on that it won’t be able to dry during those 10 minutes.
Rinse from the inside out
Rinsing this way helps loosen dirt from the fibers of the filter and will wash them away. If it still seems dirty after you’ve done this, repeat the previous step and this one two or three more times until you’re satisfied with the results.
Let the filter dry
Shake out any excess water and set it aside so it can dry naturally. Don’t rush it. The filter needs to be completely dry before applying oil.
Check for damage and apply oil
Make sure there are no holes in the filter. If there are, dispose of it and get a new one. If the filter looks good, on the other hand, you can proceed to apply the oil. Let it sit for 20 minutes and apply more oil if there are still areas that haven’t been covered.
We hope you’ve found the information in this article helpful. You can now purchase a UTV air filter with ease and you can also clean it and reuse it safely. Best of luck to you!